## e-books in Strength of Materials & Solid Mechanics category

**Mechanisms: Materials**

by

**Robert F. Brun, John C. Sheihing**-

**Delmar Publishers**,

**1973**

This text is an introductory treatment of Modern Materials, combining the elements of mechanical theory with those of material and its behavior. The experiments are presented in an action-oriented format combininga textbook with a laboratory manual.

(

**2682**views)

**Introduction to Continuum Mechanics**

by

**David J. Raymond**-

**New Mexico Tech**,

**1999**

The textbook develops the subject of continuum mechanics from the point of view of an applied physicist with interests in geophysics and astrophysics. The basic subjects covered are central to the full spectrum of applications of continuum mechanics.

(

**5798**views)

**Continuum Mechanics**

by

**Bob McGinty**-

**ContinuumMechanics.org**,

**2014**

This text presents the principles of finite deformation continuum mechanics with many example applications to metals and incompressible viscoelastic materials (rubber). It can serve as lecture notes for a graduate level course in continuum mechanics.

(

**2611**views)

**Mechanical Properties of Materials**

by

**David Roylance**-

**MIT**,

**2008**

Uniaxial Mechanical Response; Thermodynamics of Mechanical Response; Fiber-reinforced polymer-matrix composite materials; General Concepts of Stress and Strain; Yield and Plastic Flow; Fracture (Fracture Mechanics - the Energy-Balance Approach).

(

**2973**views)

**Engineering Mechanics of Solids**

by

**Louis L. Bucciarelli Jr.**-

**McGraw-Hill**,

**1994**

This is a book about the Mechanics of Solids, Statics, the Strength of Materials, and Elasticity Theory. Along the way you will learn about stress, strain, the behavior of trusses, beams, of shafts that carry torsion, even columns that may buckle.

(

**2753**views)

**Applied Strength of Materials for Engineering Technology**

by

**Barry Dupen**-

**Purdue University**,

**2012**

Contents: Introduction; Stress and Strain; Poisson's Ratio and Thermal Expansion; Pressure Vessels and Stress Concentrations; Bolted and Welded Joints; Torsion in Round Shafts; Stresses in Beams; Beam Deflection; Beam Design; Combined Stresses; etc.

(

**3299**views)

**Solid Mechanics Lecture Notes**

by

**Piaras Kelly**-

**The University of Auckland**,

**2013**

Lecture notes on solid mechanics for engineering students. Part I:An Introduction to Solid Mechanics Part II:Engineering Solid Mechanics Part III:Foundations of Continuum Solid Mechanics Part IV: Material Models in Continuum Solid Mechanics.

(

**10179**views)

**Mechanical Metallurgy**

by

**George Ellwood Dieter**-

**McGraw-Hill**,

**1961**

In writing 'Mechanical Metallurgy' an attempt has been made to cover, in some measure, the great diversity of interests. The objective has been to include the entire scope of mechanical metallurgy in one fairly comprehensive volume.

(

**4191**views)

**Applied Mechanics of Solids**

by

**Allan F. Bower**-

**CRC Press**,

**2011**

This text summarizes the physical laws, mathematical methods, and computer algorithms that are used to predict the response of materials and structures to mechanical or thermal loading. It is intended for advanced undergraduate or graduate students.

(

**3459**views)

**Mechanics of Solids and Fracture**

by

**Ho Sung Kim**-

**Bookboon**,

**2013**

Contents: Stress And Strain; Linear Elastic Stress-Strain Relations; Circular Plates; Fundamentals For Theory Of Elasticity; Linear Elastic Stress Field In Cracked Bodies; Plastic Deformation Around A Crack Tip; Crack Growth...

(

**6980**views)

**Introduction to Mechanics of Materials**

by

**Roland Jančo; Branislav Hučko**-

**Bookboon**,

**2013**

This book is a pilot course in the Mechanics of Materials (Elasticity and Strength) offered to students throughout the bachelor study. The objective of this course is to develop the ability to analyse a given problem in a simple and logical manner.

(

**7886**views)

**Applied Fracture Mechanics**

by

**Alexander Belov (ed.)**-

**InTech**,

**2012**

The book presents application of fracture mechanics methods to materials science, medicine, and engineering. Topics include safety of nuclear reactor components, fatigue effects in pipelines, environmental effects on fracture, and more.

(

**4268**views)

**Solid Mechanics**

by

**James R. Rice**-

**Harvard University**,

**2010**

The application of the principles of mechanics to bulk matter is divided into the mechanics of fluids and the mechanics of solids. Solid mechanics is concerned with the stressing, deformation and failure of solid materials and structures.

(

**4764**views)

**Theory of Waves in Materials**

by

**Jeremiah Rushchitsky**-

**BookBoon**,

**2011**

The book unites the basic theoretical facts of solid mechanics - mechanics of materials and mechanics of wave processes. It links three important facts: physical properties of materials, mathematical models and the propagation of waves.

(

**5008**views)

**Applied Mechanics and Strength of Materials**

by

**A.B. Clemens**-

**International TextBook Company**,

**1906**

The book is written in the simplest language possible, so as to make it readily understood by all students. Necessary technical expressions are clearly explained when introduced. Practical and accurate information is given in clear and concise form.

(

**7916**views)

**Elementary Applied Mechanics**

by

**A. W. Thomson, T. Alexander**-

**MacMillan**,

**1916**

The work forms an elementary consecutive treatise on the subject of Internal Stress and Strain. The whole is illustrated by a systematic and graduated set of Examples. At every point graphical methods are combined with the analytical.

(

**19681**views)

**Applied Mechanics**

by

**Gaetano Lanza**-

**J. Wiley**,

**1905**

The work is a treatise on strength and stability, a number of subjects usually included in treatises on applied mechanics are omitted. It is primarily a text-book, the different subjects are presented in the best way for the progress of the class.

(

**19150**views)

**Mechanics of Materials**

by

**Madhukar Vable**-

**Michigan Technological University**,

**2009**

With strong practical examples and real-life engineering problems, the book promises to provide the skills and principles that students need to organize, integrate, and make sense of the flood of information in the world of modern engineering.

(

**11043**views)

**The Analysis of Stress and Deformation**

by

**G. W. Housner, T. Vreeland Jr.**-

**California Institute of Technology**,

**1965**

The book for a course in the mechanics of deformable bodies for advanced undergraduate or first-year graduate students. It goes more deeply into the fundamentals and gives less emphasis to the design aspects of the subject.

(

**13386**views)