e-books in Electronics category
by Jim Williams - Cahners Pub. Co. , 1985
Analog design is not dead. Neither is interest in it. Although digital design techniques have become the primary focus of most magazines, the need for linear applications remains strong. Designers continue to make significant advances in linear ICs.
(874 views)
by James M. Fiore - Mohawk Valley Community College , 2018
The book progresses from the fundamental circuit building blocks through to analog/digital conversion systems. The text is intended for use in a second year Operational Amplifiers course at the Associate level, or for a junior level course.
(944 views)
by James M. Fiore - Mohawk Valley Community College , 2018
The text will allow readers to become proficient in the analysis and design of circuits utilizing discrete semiconductor devices. The text is intended for use in a first or second year course on semiconductors at the Associate or Baccalaureate level.
(989 views)
by Hans Summers , 2014
Radio Hobbyist's Designbook was designed to guide you into design of electronics apparatus that relates to radio. It assumes you know something about electronics, algebra and trigonometry. Topics cover the frequency spectrum of DC through VHF.
(1715 views)
by Frank Schwierz (ed.) - MDPI AG , 2016
This volume is divided into two parts. Part I comprises four chapters which review the current state of the art in different areas of research on 2D materials and devices. Part II deals with specific important aspects of 2D materials and devices.
(2797 views)
by Deepak Kumar Tala - ASIC World , 2014
Verilog is a Hardware Description Language (HDL) used to describe a digital system: for example, a network switch, a microprocessor or a memory or a simple flip-flop. This just means that, by using a HDL, one can describe any hardware at any level.
(2921 views)
by Mohan Jacob (ed.) - MDPI AG , 2015
Organic electronics, such as displays, photovoltaics and electronics circuits and components, offer several advantages over the conventional inorganic-based electronics because they are inexpensive, flexible, unbreakable, optically transparent, etc.
(3051 views)
by Richard W. Tinnell - Delmar Publishers , 1971
This book provides meaningful experience in electric circuit analysis for students of modern technology. It explains the basic principles of current flow, simple DC circuits, an introduction to AC circuits, resonance, and transformer coupling.
(6170 views)
by Richard W. Tinnell - Delmar Publishers , 1972
This material is intended to provide meaningful experience in electronic amplifier analysis for students of modern technology. The topics included provide exposure to basic principles of solid state devices, amplifier circuits and applications.
(2284 views)
by K.F. Cathey, R.D. Mitchell, R.W. Tinnell, D.A. Yeager - Delmar Publishers , 1972
The book is intended to provide meaningful experience in digital circuit analysis for students of modern technology. The topics included: basic principles of digital logic, logic gates, flip-flops and other circuits, as well as basic digital systems.
(4555 views)
by Charles W. Kann - Gettysburg College , 2014
This text introduces the most important digital circuits: adders, decoders, multiplexers, D flip-flops, and simple state machines. The textbook puts the ability to understand these circuits into the hands of hobbyists or Computer Science students.
(2529 views)
by James Feher - Global Text Project , 2009
This lab manual provides an introduction to digital logic, starting with simple gates and building up to state machines. Students should have a solid understanding of algebra as well as a rudimentary understanding of basic electricity.
(2738 views)
- Wikipedia , 2013
From the table of contents: Introduction - Electronics, Voltage, Electric current, Frequency, Direct current, Alternating current; Electrical Components; Basic circuit laws; AC analysis; Basic devices; Digital circuits; and more.
(3778 views)
by Forrest M. Mims III - Radio Shack , 1993
This book includes standard application circuits and circuits designed by the author. Each circuit was assembled and tested as the book was developed. After the book was completed, the author reassembled each circuit to check for errors.
(4552 views)
- Wikibooks , 2012
The aim of this book is to teach you simple analogue and digital electronics at a practical level. By the end of this book, you should be able to combine circuit elements to create more complex circuits, and have an understanding of how it works.
(5013 views)
by Yuping Wu (ed.) - InTech , 2013
In this book, a new architecture for a SAR ADC is proposed to eliminate the process mismatches and minimize the errors. The automated system for a passive filter circuits design is presented with the local searching engaging...
(12542 views)
by Ilgu Yun - InTech , 2012
This book represents recent progress and development of the photodiodes including the fundamental reviews and the specific applications developed by the authors themselves. The book is intended for graduate students, engineers, and researchers.
(7505 views)
- Wikibooks , 2012
The aim of this textbook is to explain the design and function of electronic circuits and components. The text covers electronic circuit components, DC analysis, and AC analysis. It should be useful to hobbyists as well as engineering students.
(20915 views)
- Wikibooks , 2012
This book will serve as an introduction to Digital Circuits. It will rely heavily on the concepts of Discrete Math, but will not require any previous knowledge of the subject because all necessary math concepts will be developed in the text.
(4863 views)
by G. Matthaei, E.M.T. Jones, L. Young - SRI , 1963
This book presents design techniques for a wide variety of low-pass, band-pass, high-pass, and band-stop microwave filters, for multiplexers, and for certain kinds of directional couplers. The text can be used by designers and engineers.
(5257 views)
by Yatindra Nath Singh, Joseph John - NPTEL , 2007
Basic idea of the course will be to introduce the basic concepts required to understand the electronic circuits. The course has been built for first year undergraduate students and targeted as general course for all branches of engineering.
(20640 views)
by Bill Wilson - Connexions , 2010
An introduction to solid state device, transmission lines and propagating electromagnetic waves. Contents: Conductors, Semiconductors and Diodes; Bipolar Transistors; FETs; IC Manufacturing; Transmission Lines; AC Steady-State Transmission.
(7539 views)
by Paul K Chu - InTech , 2010
This book describes the current status of important topics in solid-state circuit technologies. The chapters are grouped under the following categories: general information, circuits and devices, materials, and characterization techniques.
(9029 views)
by Valery Vodovozov - BookBoon , 2010
This work introduces a reader to the basics of electronic engineering. Here, students may get their first knowledge of electronic concepts and basic components. Emphasis is on the devices used in day-to-day consumer electronic products.
(9665 views)
by John E. Whitehouse - Horwood Publishing Limited , 1997
Contents: Network Equations; Network Theorems; Networks with Inductors and Capacitors; Network Analysis using Phasors; The Laplace Transform in Network Analysis; The Fourier Series and Fourier Transform; The Frequency Response of Networks; etc.
(9537 views)
by Thomas R. Cuthbert - John Wiley & Sons , 1983
This practical guide to designing electronic circuits using small computers and programmable calculators makes it easy to implement both classical and sophisticated design techniques. It uses the interaction between circuit designer and computer.
(9857 views)
by Walt Jung - Newnes , 2004
A complete and up-to-date op amp reference for electronics engineers from the most famous op amp guru. This practical handbook not only teaches the basic fundamentals of op amps, it also covers various op amp application areas in great detail.
(24749 views)
by Wasif Naeem - BookBoon , 2009
This book covers fundamental aspects of electric circuits that form the core of many engineering disciplines. Techniques to analyze and solve electric circuits are explained in a simple manner and examples are shown to demonstrate each strategy.
(9602 views)
by O.G.C. Dahl - McGraw-Hill , 1928
The purpose of this book is to present the engineering aspects of circuit theory. Although theoretical, the viewpoint of the book is that of the engineer. It gives the methods and tools necessary for the analysis of modern power-circuit problems.
(11649 views)
by Nebojsa Matic - mikroElektronika , 2003
PLC are industrial microcontroller systems where hardware and software are specifically adapted to industrial environment. In this book you will learn how they work, how to connect a simple sensor, how to program in ladder diagram, and more.
(10197 views)
by Tony R. Kuphaldt , 2009
This is a series of online textbooks covering electricity and electronics. The information provided is great for both students and hobbyists who are looking to expand their knowledge in this field. The books are updated over time.
(12177 views)
by Ron Mancini - Newnes , 2003
A complete tutorial and reference to op amp theory and applications. Covered are basics op amp physics, idealized op amp configuration, feedback theory, single and dual supply operation, op amp parameters, oscillators, active filters, etc.
(14206 views)
by Abhijit Athavale, Carl Christensen - Xilinx , 2005
This book discusses high-speed serial designs with real world examples of how to implement working designs. High-speed serial I/O can be used to solve system interconnect design challenges. Such I/Os allow you to create high-performance designs.
(11207 views)
by Miomir Filipovic - mikroElektronika , 2003
This online book on practical electronics will teach you to create electronic devices on your own. All components and circuits are illustrated and explained in detail with lots of simple and complex examples for the beginners.
(29247 views)
by Engineering Staff Analog Devices Inc. - Newnes , 2005
This handbook is an engineering reference that covers fundamentals of data converters, techniques and applications the basic theoretical elements, the latest advances in the field, high accuracy and high-speed ADCs, sample-and-hold amplifiers.
(11676 views)
by Bart Van Zeghbroeck , 2007
This book explores the behavior of semiconductor devices, to show the relation between the device material parameters, and the resulting electrical characteristics. The text provides the link between the physics and the design of electronic circuits.
(11833 views)
by Tony R. Kuphaldt , 2008
Questions and answers about electronics covering several topics: basic electricity, simple circuits, Ohm's Law, op-amps. A tested way of centering instruction around students is to teach by asking questions, generally called the 'Socratic method'.
(11822 views)
by Tony R. Kuphaldt - ibiblio.org , 2008
The goal was to put readable, high-quality information of industrial electronics into the hands of students. The book was written without delving too heavy on the math, while still maintaining a lot of important information.
(53286 views)
- OrCAD , 1998
This manual is the reference needed when working with special circuit analyses in PSpice A/D. It covers detailed command descriptions, definitions of start-up option, and a list of supported devices in the digital and analog device libraries.
(12545 views)